Rear sight Spy short 
New rearsight to allow better viewing of windflags
Improved field of vision allows for better stability in standing position
20 clicks per rotation
Left and right handed (horizontal adjustment on both sides)
Built in glare tube

**Note - Iris in pictures not included, available as extras

Item 9515 for Anschütz

item 9515W for Walther

item 9515F for FWB

Open 5-finger-glove from a combination of leather and temperature regulating fabric VELON which give the following advantages:

• The glove stays soft and smooth even in cold, therefore comfortable wear.
• Water-resistant and temperature regulating.
• Top Grip sheet avoids the sliding of the sports weapon.
• Short thumb and index finger for a problem free loading of the sports weapon.

Rifle Pin 1918 
- Length 56 mm.
- With butterfly-closure

- Length 56 mm.
- With butterfly-closure

riflescope Anschütz KK50 4-12x44 AO 
Fully multi-coated optics for maximum clarity 
1" matte black anti-glare body tube 
¼ M.O.A BDC turrets for accurate adjustment, 3,65 mm per click at 50m
Adjustable objective for parallax free shooting
Maximum adjustment horizontal and vertical 90 M.O. A
eye relief 89 mm at x 4 and 76 mm at x 12
incl. high mounts for 11 mm prism
length 336 mm weight 582 g
reticle KK50
adjustable objective – 10m to infinity
FOV 10 m at 100 m with x4 
Waterproof, Shockproof and Fog Proof
Protective lens caps 
Hawke 10 year Warranty

Adjustable forendstock “Angle10°” 
- To achieve a natural hand position in prone and kneeling shooting
- Relaxed shooting with 10 degree angle ( 15 degree )
- Optimum pressure distribution Hand-shank-hand stop
- Setting the user’s hand width, 40 mm to 50 mm
- Height-adjustable (optional) 10 mm and 20 mm
- Reduction of pain in the hand area
- Can be used with any rifle stock
- Weight 280 grams

Aluminum Butt Plate Precise 

Air rifle shooters who prefer slim hook butts will embrace this product. 
6 stop-pins, adjustable in length, on the vertical axle of the hook butt can be
adjusted individually to the shoulder’s size and form. These adjustments are
easily done and require no special technical knowledge. Rubber heads on the
pins improve the hold. These rubber heads are not glued but can be removed
without difficulty. If this is not wanted they can be fixed with super glue.

Lateral screwed clamping plates fix and secure the pins in their adjusted position.
A guide rail with integrated fast clamping secures and fixes the adjustment in 
height and depth without using tools. An additional adjustment screw allows
a very accurate fine-tuning of the height while in position. This ensures repeated
precise positioning and managing of the rifle. 


The ahg-hook butt plate PRECISE can be mounted to any current match rifle. 

 

ANGLE PLATE for Alu Benchrest Wedge CONTACT 

Some benchrest shooters prefer to shoot in a sideways position to get a better fit of the butt plate on the shoulder.

For this purpose we have developed the ahg-angle plate art. no. 1024 as an additional accessory for the benchrest wedge art. no. 1023. Using the ahg-angle plate made from alu, the rifle on the rest is tilted at a 10° angle in shooting direction and guarantees the shooter tension free positioning for consecutive shots.

Additional transverse slots allow putting the main stress of the rifle exactly on the middle of the benchrest wedge. 

Angle: 
10°

Weight: 
204 g.

barrel extension 
Made from high-strength aluminum and naturally anodized, this ahg-tube extends the sighting line by 157 mm. The weight of 163 g optimized the muzzle inertia during shot release and also allows more added weights to balance the sporting rifle ideally.

A center ring with an integrated positioning pin is supplied which allows a repeatedly exact mounting and de-mounting of the barrel extension. This tube should be cleaned after each shooting heat in order to avoid oxidation and guarantee optimum operation.

The robust clamp made from stainless steel threaded nuts and cylinder screws ensures best functioning.

The ahg-barrel extension is especially crafted with an inner diameter of 25.65 mm, accurately fitting all 1913 as well as 2013/690 Anschütz models.