Shooting Jacket Benchrest Super Match

ACORDING TO ISSF RULES

FOR 10 M AIR RIFLE 

CUTTING OF SHOT IS CLEAR 

HIGH QUALITY PAPER 

HIGH QUALITY PRINTING 

 All alu parts are lighter and milled in futuristic design
- Extremely light by use of fiberglass-composite-tubes, 
- Extremely sturdy through sophisticated foot geometry and extending lever locking system
- Quick setup and dismounting by folding legs and lever locking system
- Space-saving storage in supplied bag, approx. 63 cm long
- Tripod can be placed very close to the stand due to thought-out foot geometry
The foot geometry with a rest on the side of the middle tube offers a minimum
of body turn when resting the gung. The ammo rest is designed to hold small bore rounds boxes
on one side and – turned over – the round tins of air rifle pellets or the famous shaker box. 
The ammo rest is also equipped with various holes in order to keep tools, e.g. hex key etc. 
The tripod can be expanded up to a height of 190 cm and adjusted infinitely, by pushing 
the tubes together it is quickly ready for use in kneeling position.
total weight 1,49 kg

Refiler for Anchutz Air Rifle 

The model 8001 Compressed Air 
is derived from the renowned barreled action of the compressed air rifle 8002. 

This model is especially interesting for beginners and clubs who are looking for a high quality, attractive but low-cost air rifle version. The cocking lever is at the right side. It is possible, however, to attach it to the left as well. 

The light aluminum barrel jacket is as long as the one of the model 8002, the JUNIOR model, however, is equipped with a shorter JUNIOR compressed air cylinder. As this beginner model is based on a modular principle it is possible for the advanced shooter to attach all of the other ANSCHÜTZ accessory components. 

The 8001 Compressed Air JUNIOR COLOR
is equipped with a colored right/left stock. The cheek piece is variably adjustable in height via steel columns without thread, the backend is equipped with the butt plate carrier with tiltable column guide and the aluminium butt plate 4759. 

The new ANSCHÜTZ 9015 ONE BASIC is a target air rifle based on our successful and unique 9015 ONE model. The outstanding precision and various adjustment possibilities of the fore-end combined with the unrivaled target two-stage trigger 5065 4K are complimented with the newly developed rear section of the 9015 ONE BASIC stock. The solid and robust stock is equipped with the well-known and common ANSCHÜTZ butt plate and cheek piece adjustments which have been proven over many years.

The modular construction of the ONE-stock
The stock, including grip, can be separated from the fore-end in just a few seconds by simply releasing one screw. It can then be reassembled precisely without any play to form a 100 % rigid connection. This offers you the opportunity to change the ONE Basic rear section for the rear section of the 9015 ONE, allowing for even more adjustment possibilities and stock positions.

Clip on Eye shield a product for use on glasses and spacks for eyes blinder use for both rifle and pistol

Adjustable

 As per ISSF and NRAI Rules 2018

Also NRAI Rules Approved By The National Rifle Association

ahg-COLOR 2 

5-finger glove. 

• TOP GRIP padding.
• Stretch material at the wrist.
• According to ISSF + DSB-rules.
• Color: red-blue.

Sizes: 
XS, S, M, L, XL.

Material: 
100% Amara. 

Inner lining: 
34% wool, 33% viscose and 33% polyacryl. 

Padding: 
Top Grip

ahg-COMFORT SHORT 

Open 5-finger-glove from a combination of leather and temperature regulating fabric VELON which give the following advantages:

• The glove stays soft and smooth even in cold, therefore comfortable wear.
• Water-resistant and temperature regulating.
• Top Grip sheet avoids the sliding of the sports weapon.
• Short thumb and index finger for a problem free loading of the sports weapon.

Size: 
XS, S, M, L, XL.

Material: 
80 % Velon-cotton/ PES combined with PUR, 20 % leather. 

Inner lining: 
34 % wool, 33 % viscose, 33 % polyacrylic. 

Padding: 
Top Grip.

ahg-CONTACT 

A new glove developed by ahg-Anschütz which offers more contact to the gunsupporting hand, much freedom of movement and maximum padding. Thumb and forefinger are open to allow comfortable loading of the gun. 

We have used a special soft leather and a breathable fleece material for a good regulation of temperature and reduction of perspiration. 

Palm and back of the glove are equipped with a newly developed hard-wearing antislide padding for proper adjustment to the hand and non-slip positioning of the gun. If required, the glove can be washed at 30° C. (Handwash)

Sizes: 
XS, S, M, L, XL, XXL. 

Material: 
46% leather, 50% polaire polyester, 4% rubber. 

Padding: 
60% polyamid, 40% polyurethane

RED GECO DIABOLO .177 AIR PELLETS

 well-known wholesaler of Air Pellets, Pistol targets, Weapon Cleaning. All these products are quality assured by the executive to ensure perfect qualities and longer life. Highly demanded, these products are accessible from the market in different sizes and designs.