Anschutz

Air rifle model 8002 S2 Compressed Air

Good is not good enough. ANSCHÜTZ has developed a successor for the target air rifle series model 2002 which has been very successful for many years. With the new Target Compressed Air Rifle Model 8002 S2 the shooters profit from the knowledge ANSCHÜTZ acquired in the course of the latest revolution in the field of air rifle technology. A target compressed air rifle that meets all state-of-the-art requirements of a competitive air rifle.
NEW: now with maintenance-free stabilizer!

Barreled action
Recoil and vibration-free ANSCHÜTZ compressed air barreled action with vibration absorbing elastomers. The very fast lock time of the ANSCHÜTZ 2002 Compressed Air has been outstanding all times. Now the lock time was shortened even more by using new materials and technologies, for example for the new firing pin. The mechanic trigger unit is a completely new development, too, and offers a constantly reliable trigger behaviour even at extreme temperatures due to the use of uniform materials. The barreled action is only cocked when the action is closed completely. If the cocking lever is not closed completely, it jumps back automatically and a shot release is not possible. Safety is also an important feature of the dry firing device. The dry firing mode can only be actuated in cocked condition. It is therefore not possible to uncock the barreled action by pushing the dry firing switch once the trigger has been released. Thus an inadvertent shot release is avoided. Air filter against pollution. To guarantee a trouble-free function of the compressed air technology an air filter was developed to protect the pressure regulator and the valve against impurities which in turn avoids malfunctions.The refill adapter was also equipped with an air filter. The aluminum compressed air cylinder (max. 200 bar filling pressure) is equipped with a manometer and can easily be exchanged without tools. Its capacity lasts for approx. 300 shots at a filling pressure of 200 bar.The maintenance friendly valve unit provides for a precise shot release and an extremely short lock time at an utmost consistency of pressure from shot to shot. 

Air rifle model 8002 S2 Compressed Air

Good is not good enough. ANSCHÜTZ has developed a successor for the target air rifle series model 2002 which has been very successful for many years. With the new Target Compressed Air Rifle Model 8002 S2 the shooters profit from the knowledge ANSCHÜTZ acquired in the course of the latest revolution in the field of air rifle technology. A target compressed air rifle that meets all state-of-the-art requirements of a competitive air rifle.
NEW: now with maintenance-free stabilizer!

Barreled action
Recoil and vibration-free ANSCHÜTZ compressed air barreled action with vibration absorbing elastomers. The very fast lock time of the ANSCHÜTZ 2002 Compressed Air has been outstanding all times. Now the lock time was shortened even more by using new materials and technologies, for example for the new firing pin. The mechanic trigger unit is a completely new development, too, and offers a constantly reliable trigger behaviour even at extreme temperatures due to the use of uniform materials. The barreled action is only cocked when the action is closed completely. If the cocking lever is not closed completely, it jumps back automatically and a shot release is not possible. Safety is also an important feature of the dry firing device. The dry firing mode can only be actuated in cocked condition. It is therefore not possible to uncock the barreled action by pushing the dry firing switch once the trigger has been released. Thus an inadvertent shot release is avoided. Air filter against pollution. To guarantee a trouble-free function of the compressed air technology an air filter was developed to protect the pressure regulator and the valve against impurities which in turn avoids malfunctions.The refill adapter was also equipped with an air filter. The aluminum compressed air cylinder (max. 200 bar filling pressure) is equipped with a manometer and can easily be exchanged without tools. Its capacity lasts for approx. 300 shots at a filling pressure of 200 bar.The maintenance friendly valve unit provides for a precise shot release and an extremely short lock time at an utmost consistency of pressure from shot to shot. 

The 8002 S2 benchrest bargain version with a walnut stock. With this model ANSCHÃœTZ offers all starters in benchrest shooting a top quality product at an extraordinarily favourable price.
The 8002 S2 BENCHREST START is equipped with a right/left walnut benchrest stock with a non-slip pistol grip and an extended benchrest cheek piece as well as a non-slip rubber butt plate. It is possible to adjust the butt plate in length by spacers. The backend is prepared to take the butt plate carrier with tiltable columns. With the help of this accessory it is possible to attach the ANSCHÃœTZ aluminium benchrest butt plate. The cocking lever is on the left side but it is also possible to install it on the right side. The model 8002 S2 BENCHREST START will be delivered including the sight set 6834 and a sighting line extension.
Delivered with:
Sight set 6834, Accessory box with filling adapter, air release screw, sighting line extension, special grease 4425, allan key (5 pieces), safety discs, o-rings, barrel weight and manual with original test target.
This product can only be sold in a face to face transaction.

Model 9003 Premium S2 BENCHREST Precise 

Barreled action:
• Maintenance free stabilizer.
• Revolutionary firing pin and valve system for even calmer shot release.
• Optimised flow behaviour.
• Recoil and vibration free compressed air barreled action.
• Extremely short lock time.
• Precisely adjustable match trigger.
• Optimised cocking.
• Special concept for dry firing and safety.
• Air filter against pollutions.
• Maintenance-friendly system.
• Easily exchangeable compressed air cylinder with manometer.
• Adjustable trigger blade.
• Cocking lever mountable left and right.

Stock:
• The wedge-shaped design has been calculated by vibration test analysis.
• New barrel bearing in crossed aluminum stock.
• Milled out of high strength quality aluminum.
• Precise aluminum butt plate with individual adjustment possibilities.
• Multifunctional adjustment possibilities with precise adjustment.
• A progressional and millimetre accurate scaling exclude mix-ups of parameters.
• The actuated, positive form and force-fit clamping of butt plate.
• Large knurled head screws at backend offer high operating comfort.
• Cover for adjustment screws for use in competition.
• Fore-end adjustable in height, length and tilted angle for optimum adaptation to the body.
• Adjustable pistol grip.
• PRO-Grip equipment.

The model 8001 Compressed Air 
is derived from the renowned barreled action of the compressed air rifle 8002. 

This model is especially interesting for beginners and clubs who are looking for a high quality, attractive but low-cost air rifle version. The cocking lever is at the right side. It is possible, however, to attach it to the left as well. 

The light aluminum barrel jacket is as long as the one of the model 8002, the JUNIOR model, however, is equipped with a shorter JUNIOR compressed air cylinder. As this beginner model is based on a modular principle it is possible for the advanced shooter to attach all of the other ANSCHÜTZ accessory components. 

The 8001 Compressed Air JUNIOR COLOR
is equipped with a colored right/left stock. The cheek piece is variably adjustable in height via steel columns without thread, the backend is equipped with the butt plate carrier with tiltable column guide and the aluminium butt plate 4759. 

The new ANSCHÜTZ 9015 ONE BASIC is a target air rifle based on our successful and unique 9015 ONE model. The outstanding precision and various adjustment possibilities of the fore-end combined with the unrivaled target two-stage trigger 5065 4K are complimented with the newly developed rear section of the 9015 ONE BASIC stock. The solid and robust stock is equipped with the well-known and common ANSCHÜTZ butt plate and cheek piece adjustments which have been proven over many years.

The modular construction of the ONE-stock
The stock, including grip, can be separated from the fore-end in just a few seconds by simply releasing one screw. It can then be reassembled precisely without any play to form a 100 % rigid connection. This offers you the opportunity to change the ONE Basic rear section for the rear section of the 9015 ONE, allowing for even more adjustment possibilities and stock positions.